GLOUCESTERSHIRE COUNTY COUNCIL & S.E.C. LIGHTING SERVICES
Isolate mains supply to lantern and open lid in usual manner by releasing the clip at the front of the lantern.
Raise lid to reveal gear tray assembly as detailed below.
Unplug 4 pin Metway electrical connector fitted to gear tray wiring, Blue circle.
Lift gear tray up and away from lantern body Locating pins, Yellow circles NOTE: It may be necessary to lever gear tray away with screwdriver.
Remove all of the existing control gear and retain (Black & white wires to lamp holder assembly).
Position new pre wired gear tray assembly onto old gear tray and reinstall by aligning both trays onto the 2 pre formed locating hols as detailed above
Connect Black & White lamp assembly wires using the connector provided.
Re connect the 4 pin Metway connector to complete the assembly.
Install lamp & Re connect mains supply and test for lamp operation.
