Micatron Dimming Switch for use with Dual Tapped Magnetic Ballasts
Technical Specification for the Micatron Dimming Switch
Switch Type
Electromechanical Relay with Zero Crossing switching
Voltage
240V +/-10%
Load Handling
2 x 400W HID Lamps Max 60uF
Load Current Capacity
1,000W Tungsten 1,800VA Inductive
Dimming Times
Default setting : Midnight to 05:30 G.M.T. or to Customers specification, quantity dependant
Circuit Power Consumption
Less than 0.20W Switched On. No Power Consumption when Off.
Operating Temperature (Ta)
-20 o C to +94 o C
Power Loss During Load Handling
Negligable
Enclosure Material
ABS
IP Rating
IP65
EMC
To EN50082-1 & EN55014
Dimentions
L 86mm x W 49mm x H26mm
Notes:
• The Dimming Switch will not interfere with lamp testing routines as it will ignore switching cycles of less than 30 minutes.
• The Dimming Switch will always default to the highest switched level of the ballast. Standard gear options available:
70w dimming to 50w
100w dimming to 70w
150w dimming to 100w
250w dimming to 150w
400w dimming to 250w
